Trying to love the unlovable

[rayc]

Every now & then I adjust the tone knob...just for a couple of seconds and then it's straight back to full treble. Odd.

[CrowsofFritz]

Every now & then I adjust the tone knob...just for a couple of seconds and then it's straight back to full treble. Odd.

Using it as a slow wah effect is cool, though. I don’t think I’ve ever met anyone who’s actually kept it at different settings, though.

[JD01]

Removing the pointless knobs that make your guitar sound shitter is a good idea. I had a think about this earlier. I'm pretty sure I've never recorded or played live with the tone knob on anything other than 10.

[Greg_L]

Removing the pointless knobs that make your guitar sound shitter is a good idea. I had a think about this earlier. I'm pretty sure I've never recorded or played live with the tone knob on anything other than 10.

Exactly. And in the future if I decide I need a tone control it will be simple to put one master tone control in place.

But that's not likely.

And Strat tone controls are fucking stupid anyway. The neck and middle pickups have tone controls, but the bridge - the one pickup that might actually need it - does not.

[Greg_L]

Every now & then I adjust the tone knob...just for a couple of seconds and then it's straight back to full treble. Odd.

Lol. The only time I touch my tone controls are a quick check to make sure they're still all the way wide open.

[Lt. Bob]

And Strat tone controls are fucking stupid anyway. The neck and middle pickups have tone controls, but the bridge - the one pickup that might actually need it - does not.

That's why on my stra5t I have the tone control on the bridge and middle 'p'up .... also have the bridge at a 'reverse' angle so the p'up is closer to the bridge on the bass side instead of the usual.

Also on my strat I use a 3 mini-toggle system with no 5-way>
A 3 position mini toggle for each p'up ..... you can have any combination of p'ups and any phase too

[Greg_L]

Well we'll see how it goes. The current stock Mexican pickups aren't staying in there for long. I've got a set of CBS era 60s pickups headed my way from a friend of mine.

[Greg_L]

Oh, also...I had to paint those pickup covers. Those are the original white pickup covers, but they had faded and morphed into a yellow-ish cream color. Normally I like that aged white look but not with the new stark white pearlized pickguard.

And I'd ordered a few cheapo knockoff pickup cover sets off the amazon but none of them fit! The pole spacing was way too wide. I either have weird pickups or the Chinese counterfeiters don't know how to measure hole spacing. So I just said fuck it and painted mine.

[WhiskeyJack]

BEAUTY!!!

Where did you get those little plugs for the empty knob positons? rather what did you look for when searching for something to do that.

I have a a hole on my P Bass from where i moved the jack from front facing to the side of the body that would be cool fill.

Pretty excited to see how this turns out.

[Greg_L]

BEAUTY!!!

Where did you get those little plugs for the empty knob positons? rather what did you look for when searching for something to do that.

I have a a hole on my P Bass from where i moved the jack from front facing to the side of the body that would be cool fill.

Pretty excited to see how this turns out.

Amazon. I think I searched "3/8" plastic hole plugs". Or something like that.

https://www.amazon.com/s?k=3%2F8+plasti ... nb_sb_noss

[Greg_L]

And here's the gold basecoat. It was hanging in the garage and it's humid down here today...like pretty much every day. It's a little smudgy with my fingerprints. It needs to be cleaned again and tack-clothed, but it's pretty smooth and even. Certainly good enough to get glittered next.

[WhiskeyJack]

It looks cool man!!!! Deadly. I figure once the glitter get's on there any sign of smudges will only ever be noticed by you.

How did you spray it though? Did you not put a "false neck" on it to hold it? How the hell did you hold it to get the edges?

[Lt. Bob]

It looks cool man!!!! Deadly. I figure once the glitter get's on there any sign of smudges will only ever be noticed by you.

How did you spray it though? Did you not put a "false neck" on it to hold it? How the hell did you hold it to get the edges?

he had a screw or hook screwed into the hole for the strap button on the butt end

[Greg_L]

It looks cool man!!!! Deadly. I figure once the glitter get's on there any sign of smudges will only ever be noticed by you.

How did you spray it though? Did you not put a "false neck" on it to hold it? How the hell did you hold it to get the edges?

I went really high-tech....I laid it flat on top of a big plastic cup. I painted it out back on my outdoor patio table. I covered the table, put a cup on the middle of it, and set the body on the cup. That got it up off the table and I sprayed the edges first. Then I'd spray the top or bottom, whichever side was facing up. Then once that dried enough to handle I'd flip it over and do it again.

My first coat of primer was done with it hanging from a tree. I didn't like that. I got runs that I had to sand out. Painting it laying flat is a much better option for me with these basecoats.

For the glitter coat I think I will have to hit it all at once for level and even glitter distribution so I'll need to come up with something that will allow me to get all around it for each coat. I don't think doing each side separately will work well for the glitter. But maybe it will.

[WhiskeyJack]

It looks cool man!!!! Deadly. I figure once the glitter get's on there any sign of smudges will only ever be noticed by you.

How did you spray it though? Did you not put a "false neck" on it to hold it? How the hell did you hold it to get the edges?

I went really high-tech....I laid it flat on top of a big plastic cup. I painted it out back on my outdoor patio table. I covered the table, put a cup on the middle of it, and set the body on the cup. That got it up off the table and I sprayed the edges first. Then I'd spray the top or bottom, whichever side was facing up. Then once that dried enough to handle I'd flip it over and do it again.

My first coat of primer was done with it hanging from a tree. I didn't like that. I got runs that I had to sand out. Painting it laying flat is a much better option for me with these basecoats.

For the glitter coat I think I will have to hit it all at once for level and even glitter distribution so I'll need to come up with something that will allow me to get all around it for each coat. I don't think doing each side separately will work well for the glitter. But maybe it will.

Get you a stick!




If you fashioned yourself a set up something like this you could still use your outdoor table in a similar way your cup method and don't have ot worry about it drying before flipping. Only difference being you will hang it off the edge of the table and make good and sure you have the counter weight on the table side perfect so there is no chance of it tipping. I'll do up a quick sketch becasue i don't have a photo how i set up my workmate bench for the actual spraying.

Hold up.

[Greg_L]

Get you a stick!




If you fashioned yourself a set up something like this you could still use your outdoor table in a similar way your cup method and don't have ot worry about it drying before flipping. Only difference being you will hang it off the edge of the table and make good and sure you have the counter weight on the table side perfect so there is no chance of it tipping. I'll do up a quick sketch becasue i don't have a photo how i set up my workmate bench for the actual spraying.

Hold up.

That's what I was planning to do for the glitter coat. Same thing.

[WhiskeyJack]

@Greg_L

See attached.



I did it this way and worked great. I was able to flip and keep going without having to wait and stop to let it dry. The only part i didn't like was crouching down to get the sides evenly but at the end of the day the job got done.

[WhiskeyJack]

OH!!!!

And if you try to do it that way, i can't stress this enough, predrill your holes in the stick and keep them plenty far away from the edges. I made my first sickout of a piece of shitty old wood and and had a near miss with the cement floor becasue the portion of it inside the neck pocket split. Use a decent piece of wood and predrillfuck.

[Greg_L]

I'm not just saying this, but I've never seen an illustration that explains a technique any better than that one.

[WhiskeyJack]

I'm not just saying this, but I've never seen an illustration that explains a technique any better than that one.