Think This Will Replace All DAW's?

Need a helping hand to make sure you do it right, first time? Got some good advice to pass on, so no-one makes the same mistakes you did? This is your forum.
Post Reply
7String
Posts: 52
Joined: Sat Jul 01, 2017 4:32 pm

Think This Will Replace All DAW's?

Post by 7String » Mon Oct 09, 2017 2:28 am

Better get it right the FIRST time! I would think this could get expensive if you don't.

The First Remote Direct To Disk Recording Ever

User avatar
Greg_L
Posts: 5956
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: Think This Will Replace All DAW's?

Post by Greg_L » Mon Oct 09, 2017 7:10 am

Isn't this how it was done at the very beginning to wax cylinders, like in 1800-something?
Rebel Yell

User avatar
jonny deep
Posts: 292
Joined: Thu Jan 05, 2017 9:25 am

Re: Think This Will Replace All DAW's?

Post by jonny deep » Mon Oct 09, 2017 9:11 am

Greg_L wrote:
Mon Oct 09, 2017 7:10 am
Isn't this how it was done at the very beginning to wax cylinders, like in 1800-something?
This is what Trump has been promising all along.

cakewalkKaKed
Posts: 166
Joined: Wed Jan 18, 2017 5:36 am
Location: wallowing in a particular insanity of any given time

Re: Think This Will Replace All DAW's?

Post by cakewalkKaKed » Mon Oct 09, 2017 11:22 am

ok,who`s going to volunteer to try it first?

User avatar
Greg_L
Posts: 5956
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: Think This Will Replace All DAW's?

Post by Greg_L » Mon Oct 09, 2017 11:54 am

cakewalkKaKed wrote:
Mon Oct 09, 2017 11:22 am
ok,who`s going to volunteer to try it first?
I'd try it....if I gave a fuck about vinyl. The resurgence of vinyl is one trend I just can't find the energy to give a shit about.
Rebel Yell

cakewalkKaKed
Posts: 166
Joined: Wed Jan 18, 2017 5:36 am
Location: wallowing in a particular insanity of any given time

Re: Think This Will Replace All DAW's?

Post by cakewalkKaKed » Mon Oct 09, 2017 12:12 pm

did you see how much the "Source Elements Source-Connect Standard 3.8 - Electronic Delivery" software was? :D

$650.00



Source Elements Source-Connect Pro 3.8 = $1,495.00


/faints

User avatar
vomitHatSteve
Posts: 416
Joined: Tue Feb 14, 2017 11:06 am
Location: Undisclosed
Contact:

Re: Think This Will Replace All DAW's?

Post by vomitHatSteve » Mon Oct 09, 2017 1:40 pm

"look for the record we cut today to be released next month"

It took you 10 minutes to track, mix, and master it! What's the rest of the delay about?!

User avatar
Greg_L
Posts: 5956
Joined: Wed Jan 04, 2017 1:07 pm
Location: Where the knuckle meets the poophole

Re: Think This Will Replace All DAW's?

Post by Greg_L » Mon Oct 09, 2017 1:45 pm

vomitHatSteve wrote:
Mon Oct 09, 2017 1:40 pm
"look for the record we cut today to be released next month"

It took you 10 minutes to track, mix, and master it! What's the rest of the delay about?!
Promotion!
Rebel Yell

User avatar
rayc
Posts: 1456
Joined: Wed Jan 04, 2017 6:31 pm
Location: South of Sydney North of Bulli

Re: Think This Will Replace All DAW's?

Post by rayc » Tue Oct 10, 2017 3:56 am

Another existing tech gimmick tied to retro tech for flavour.
Cheers
rayc

User avatar
vomitHatSteve
Posts: 416
Joined: Tue Feb 14, 2017 11:06 am
Location: Undisclosed
Contact:

Re: Think This Will Replace All DAW's?

Post by vomitHatSteve » Tue Oct 10, 2017 2:41 pm

Legit, I kind of like Welcome to 1979's work in general it seems like they're lowering the barrier-to-entry into vinyl and and letting people see how the sausage is made.
Granted, the more they promote themselves and get work, they'll get too expensive for average home recorders, but there will be imitators.

User avatar
miroslav
Posts: 1819
Joined: Wed Jan 04, 2017 3:30 pm

Re: Think This Will Replace All DAW's?

Post by miroslav » Mon Oct 16, 2017 9:26 pm

The somewhat amusing aspect of all that, considering the Chris Mara/Welcome to 1979 is all about keeping everything analog...is that they have to resort to computer/digital technology to make the remote thing work. :D

Still...it's pretty cool, and they've put it a big effort to resurrect the vinyl thing, along with other aspects of old-school technology.
I had the opportunity to exchnage a few emails with Chris a couple of years ago when I almost bought an MCI console from him (ended up being too big to make the hallway/doorway turns at my place)...he's a real nice guy and totally dedicated to his old-school approach.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest